Milling at Price Products
Programmed, machined and inspected under one roof
Our CNC milling department produces prismatic and complex-contour components, from first prototypes through production runs. Every job is programmed in house, cut on [3-, 4- and 5-axis] machining centers, and inspected before it ships.
Milling works hand in hand with our CNC lathe and mill-turn department. When a part needs both turned and milled features, it moves between departments without leaving the building — one supplier, one quality system, one point of contact.
The difference
What sets our milling apart
Four practices that keep milled parts accurate, repeatable and responsibly made.
Tombstone fixturing
Our machines are large enough to leave fixturing in place between job runs. Repeat orders skip setup and go straight to cutting, shortening lead times.
In-house programming
CAM toolpaths are optimized before the first chip is cut, reducing cycle time, tool wear and wasted material.
Inspection & quality control
Milled parts are verified to the drawing under our ISO 9001 quality system, with [first article and dimensional reports] available.
Sustainable machining
Plant-based coolants, optimized toolpaths and weekly scrap metal recycling, with dedicated staff for supplier sustainability reporting.
Capacity
Capacity and tolerances
Typical milling capability. Send your drawing and we’ll confirm the fit for your part.
| Parameter | Capability | Notes |
|---|---|---|
| Machine configurations | [3-, 4- and 5-axis] | [Vertical and horizontal machining centers] |
| Work envelope | [XX × XX × XX in.] | X × Y × Z travel |
| Part weight | Up to [XXX lb] | On the table or fixture |
| Standard tolerance | ±[0.00X] in. | Typical production features |
| Tightest tolerance | ±[0.000X] in. | Critical features, by drawing review |
| Surface finish | [XX] Ra µin. | As machined |
| Fixturing | Tombstone, [vise and custom fixtures] | Tombstones stay on the machine between runs |
| Lot sizes | [1 – XX,XXX] | Prototype through production |
| Materials | [Aluminum, stainless steel, titanium, engineering plastics] | Full materials list → |